logo_block

About

Directions

Contact

Feed and Motor Control

   This manifold assembly divides cutting oil to the saw motor and feed cylinder. Our feed modulating valve senses the saw motor pressure and adjusts the feed speed. This feature allows the saw to cut through minor pinches and multiple stems. It can be configured to accept imput volume between 10 to 16 gallons per minute of hydraulic oil with a maximum of 3000 psi pressure from a 3 position 4 way spring centered hydraulic valve that blocks the cylinder ports in the neutral position. The valve can have either manual or electric control. The hydraulic circuit can be tandem center, closed center or load sensing.

   To view this as a PDF please click here.

Model

Part Number

14G

DH0156

17G

DH0191

20G

DH0193

25G

DH0218

30G

DH0211

Feed & Motor Control

Item No.

QTY.

Part No.

Description

N/A

 

DH0156

Control Manifold Assembly

1

1

DH0155

Control Manifold, FXDA C&C

2

1

DH0052

3 Port 2000 PSI Modulating Valve

3

2

HH0750

90 Adjustable Male ORB to JIC, 853-8-8

4

3

HH0738

90 Adjustable Male ORB to JIC, 853-4-4

5

1

HH0657

Male ORB to JIC Adapter, 850-4-4

6

1

HH0807

90 Adjustable Female JIC to Male JIC, 863-4-4

7

7

XH0001

7mm Expansion Plug, CVMS007110A

8

1

VHH041

Cartridge Valve, HydraForce CV08-20-0-N-25

9

1

VHH049

Cartridge Valve, HydraForce CV08-20-0-N-150

10

1

DH0157

Sun FXDA-LAN with .228 Orifice

11

1

DH0158

Sun FCCB-LAN with .088” Orifice

12

1

DH0159

Sun FCCB-LAN with .040” Orifice

Feed & Motor COntrol Manifold Assembly Drawing

Specifications subject to change without notice or obligation.

[Home] [Logging] [Hydraulics] [Mechanical] [Automotive] [Machining] [Product Design] [Material Handling] [Firewood Processor]

Last updated on 3/16/10