We've changed our name! Please visit our new website at 6kproducts.com
Proper sawing operation requires between 14 to 16 gallons per minute of hydraulic oil with a maximum of 2000 psi pressure from a 3 position 4 way spring centered hydraulic valve that blocks the cylinder ports in the neutral position. The valve can have either manual or electric control. The hydraulic circuit can be tandem center, closed center or load sensing.
Below is a demonstration of the Connect & Cut saw.
To view the Connect & Cut instruction diagram as a web page please click here. For the diagram as a PDF please click here.
Click on one of the images below for a larger view.